FUJITSU B2610 - Manual (Page 12)

12
L i f e B o o k B S e r i e s N o t e b o o k B I O S
Mode: • Output Only
• Bi-directional
• ECP [Bi-directional] When the parallel port is enabled this option is available
allowing the user to set the mode for the parallel port. Bi-
directional allows two-way transfer of information
between your notebook and a connected parallel device.
Output Only (Half Duplex) allows information to be trans-
ferred in only one direction, from your notebook to the
printer or similar device. ECP Mode allows communication
with the ECP class of parallel I/O devices.
I/O address: • 378 - 37F
• 278 - 27F
• 3BC - 3BF [378 - 37F] Allows user to set the parallel port base I/O address when
the parallel port is Enabled.
Interrupt: • IRQ 5
• IRQ 7 [IRQ 7] Allows user to set the parallel port interrupt when the par-
allel port is Enabled.
Table 4: Fields, Options and Defaults for the Serial/Parallel Port Configurations Submenu of Advanced Menu
Menu Field Options Default Description
Quilt-3 BIOS.fm Page 12 Thursday, June 6, 2002 9:26 AM