Furuno – Furuno NX-700B User Manual
Page 69
FURUNO
NX-700A/B
SP - 2
E5649S01D-M
4 ANTENNA
UNIT
4.1 Antenna type
NX-7H: H-field antenna
4.2 Output impedance
50 ohms
4.3 Power supply
+7 V to +9 V (thru co-ax cable)
5 INTERFACE
5.1
Input data
IEC61162-1, -2
GGA, GLL, RMC, ZDA, NRQ, NMK, ACK, GNS, VHW, VTG, VBW
Output data
NRX, ALR
5.2
Alarm Normal close, contact closure signal (floating, max. 80 mA, 50 V)
for SAR alert
6 POWER
SUPPLY
6.1 NX-700A
12-24VDC: 1.5-0.8A
6.1 NX-700B
12-24VDC: 0.7-0.4A
7 ENVIRONMENTAL
CONDITION
7.1 Ambient
temperature
Antenna unit
-25°C to +70°C
Receiver / Display unit -15°C to +55°C
7.2 Relative humidity
95% at 40°C (without dew condensation)
7.3 Waterproofing
Antenna unit
IP66
Receiver / Display unit IP20 (NX-700B: IP25 for front panel)
7.4 Vibration
- 2Hz to 5 Hz and up to 13.2 Hz with a deviation of ±1 mm ±10%
(7 m/s2 maximum acceleration at 13.2 Hz);
- above 13.2 Hz and up to 100 Hz with a constant maximum
acceleration of 7 m/s
2
.
8 COATING
COLOR
8.1 Display unit
N3.0
8.2 Receiver
unit
N3.0
8.3 Antenna
unit
N9.5