Furuno RP-25 - Manual (Page 39)

2. VIDEO PLOTTER
2-25
11. Press the [ENTER] key.
For example, when you select the navigation line which has waypoints
11→12→13→14, and you are going to waypoint 12, the display shows “(11)
→@→12→(13) →(14)”. “@” means the own ship’s position.
12. If you want to be alerted when own ship nears a waypoint, press the [8] key
several times to select ON at ARRIVAL ALARM (item 8) field.
13. Press the [ENTER] key.
14. Press the numeric key t enter the arrival alarm range, and then press the
[ENTER] key.
15. Press the [9] key several times to set TURNING LINE (item 9).
OFF: Turns turning lines off.
ON:
Use this setting when vessel is not to correct cross track error to return to
course set, after arriving at turning line location.
REVISED: Use this setting when vessel is to return to course set after correcting
cross track error, after arriving at turning line location.
Own ship
Turning line
Course
Navigation
line
Track
Turning line
TURNING LINE: ON TURNING LINE: REVISED
No cross track error
correction at turning line
Cross track error
correction at turning line
16. Press the [ENTER] key.
17. Press the [NAV MENU] key to close the menu.
Note:
The turning line function requires the correct settings of TURN RATE and
SPEED RATE (on SHIP INFORMATION menu). For details, ask your
dealer.