Furuno RP-25 - Manual (Page 20)

2. VIDEO PLOTTER
2-6
[NAV INFORMATION 1]
1 [VIDEO PLOTTER 1]
2 SELECT NAVAID
GPS+LC/
DEAD RECKONING
3 OWN SHIP POSN
OFF/L/L
4 POSN
00 00.000 N/S
000 00.000 E/W
5 + CURSOR DATA
OFF/L/L
6 WPT DATA
OFF/REL/TRUE
7 [WAY POINT]
8 [NAV LINE]
9 WIND DATA
OFF/ON
0 [NAV INFORMATION 2]
Nav information 1 menu
2. For item 2, 3, 5, 6 and 9, press the appropriate numeric key several times to
select the setting, and then press the [ENTER] key.
3. For item 4 POSN, do the following procedures.
a) Press the [4] key.
b) Press the numeric key to enter the value of latitude for own ship’s position.
c) Press the [ENTER] key.
d) Press the [4] key to select North or South.
e) Press the [ENTER] key.
f) Press the numeric key to enter the value of longitude for own ship’s position.
g) Press the [ENTER] key.
h) Press the [4] key to select East or West.
i) Press the [ENTER] key.
At the SELECT NAVAID (item 2) field;
Connecting with the external navigator: Select GPS+LC.
Not connected with the external navigator: Select DEAD RECKONING. Enter
the L/L data referring to the step a) through i) in above.
4. Press the [0] key to show NAV INFORMATION 2 menu.