Fujitsu Siemens Computers LifeBook B6220 - Manual (Page 6)

6
L i f e B o o k B S e r i e s N o t e b o o k B I O S
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what serial ATA/IDE
devices are installed.
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may or may not be displayed.
Figure 2. Drive0 Submenu
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field Options Default Description
Type: • Auto
• None [Auto] Selects the ATA/IDE device type. Select Auto to have the type automatically
identified by the BIOS at POST. If None is selected, none of the following
Set-up items appear. To toggle between Auto and None press the spacebar.
LBA Format Logical Block Addressing (LBA)
Total Sectors: ___ ___ The total number of sectors on your hard disk
Maximum
Capacity: ___ ___ The maximum capacity of your hard disk
Multi-Sector
Transfers: ___ [16 Sectors] This option cannot be changed when Auto is selected; it is automatically
selected.
LBA Mode
Control: ___ [Enabled] Enables or disables logical Block Addressing in place of Cylinder, Head, Sec-
tor addressing. This option cannot be changed when Auto is selected; it is
automatically selected.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
▲
Main Advanced Security Power Boot Info Exit
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Drive0 [TOSHIBA MK6025GAS]
Type: [ Auto]
LBA Format
Total Sectors:: 117210240
Maximum Capacity: 60012MB
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control: [Enabled]
Transfer Mode: [Multiword DMA 2]
Ultra DMA Mode: [Disabled]