Fujitsu Siemens Computers S2110 - Manual (Page 8)

8
L i f e B o o k S S e r i e s N o t e b o o k B I O S
Secondary Master Submenu of the Main Menu
The Secondary Master submenu is for the internal DVD/
CD-ROM drive. The drive type is displayed on this
menu as well as the Main menu. Your notebook auto-
senses the characteristics of the internal drive installed. You will not need to modify these settings; they are
displayed for your reference.
Note that actual drive labels shown may vary.
Figure 3. Secondary Master Submenu
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field Options Default Description
Type: ■ Auto
■ None
[Auto] Selects the ATA/ATAPI device type. Select Auto to have the device
(CD-ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the
BIOS at POST. If None is selected, the following Set-up items do not
appear.
Multi-Sector
Transfers: ■ Disabled
■ 2 Sectors
■ 4 Sectors
■ 8 Sectors
■ 16 Sectors
[Disabled] This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
LBA Mode
Control: ■ Disabled
■ Enabled
[Disabled] Enables or disables Logical Block Addressing in place of Cylinder, Head,
Sector addressing. This option cannot be changed when Auto is selected.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Main
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Secondary Master [MATSHITADVD-RAM UJ-840S-(SM)]
Type: [ Auto ]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
Transfer Mode: [Standard]
Ultra DMA Mode: [Disabled]
▲