Maintenance – Harbor Freight Tools 92921 User Manual

Page 6

Page 6

SKU 92921

For technical questions, please call 1-800-444-3353

90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that

its products meet high quality and durability standards,

and warrants to the original purchaser that this product

is free from defects in materials and workmanship for

the period of 90 days from the date of purchase. This

warranty does not apply to damage due directly or

indirectly, to misuse, abuse, negligence or accidents,

repairs or alterations outside our facilities, criminal activity,

improper installation, normal wear and tear, or to lack of

maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent,

special or consequential damages arising from the use

of our product. Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS

WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part

must be returned to us with transportation charges prepaid.

Proof of purchase date and an explanation of the complaint

must accompany the merchandise. If our inspection verifies

the defect, we will either repair or replace the product at our

election or we may elect to refund the purchase price if we

cannot readily and quickly provide you with a replacement.

We will return repaired products at our expense, but if we

determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you

must bear the cost of returning the product.
This warranty gives you specific legal rights and you may

also have other rights which vary from state to state.

1. Make sure your Impact Wrench is disconnected from the air hose before attempting

any maintenance.

2. Wipe the Impact Wrench down with a lint free cloth after each use.
3. Make sure the Anvil (23) is clear of dirt or debris. If possible, spray it with compressed

air before each use.

Annually, or more often if used on a daily basis, inject oil into the oil port located on the

right side of the Housing (28).

If you do not use an inline oiler/filter system, lubricate the tool daily by holding it so that

the Air Inlet (40) is facing up. Squeeze the Trigger (30), and place one or two drops of

oil into the Air Inlet (40). Squeezing the Trigger (30) allows the oil to circulate in the

motor.

Maintenance