beautypg.com

Dynamic contrast ratio (dcr) – HP ZR30w User Manual

Page 24

background image

Dynamic Contrast Ratio (DCR)

Contrast ratio is the ratio between the brightest white and the darkest black produced by a monitor
display. DCR increases contrast ratio by automatically adjusting the backlight based on image content.
The higher contrast ratio is achieved dynamically over several frames.

NOTE:

DCR should only be enabled when viewing video full screen.

The default setting for DCR is disabled. To enable DCR, press the + (Plus) and – (Minus) buttons on
the front panel at the same time. The power LED will flash four times. To disable DCR, press the + (Plus)
and – (Minus) buttons on the front panel again. The power LED will flash one time.

18

Chapter 4 Operating the Monitor

ENWW

This manual is related to the following products: