Harbor Freight Tools 97055 - Manual (Page 6)

Page 6 SKU 97055 For technical questions, please call 1-800-444-3353.
Maximum Operating Pressure 90 PSI
Air Consumption 7 CFM (Cubic Feet Per Minute)
Air Inlet Size 1/4”-18 NPT
Speed (Max.) 18,000 RPM
Activation Method Paddle Switch with Spring-Loaded Safety Lock
Abrasive Belt Size 13” Long x 3/8” Wide
Belt Tensioning Spring-Loaded Rack with Tensioning Screw
Sound Level 93 dBA
Accessories Sanding Belts: 80, 120 Grit (1 Each, Included)
3mm Hex Wrench (Qty. 1)
speciFications
unpacKing
When unpacking, check to make sure the item is intact and undamaged. If any parts
are missing or damaged, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
13. warning! The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or other reporductive
harm). (California Health & Safety Code 25249.5, et seq.)
14. Some dust created by power sanding, sawing, grinding, drilling, and other con-
struction activities, contains chemicals known (to the State of California) to cause
cancer, birth defects or other reproductive harm. Some examples of these chem-
icals are:
Lead from lead-based paints
Crystalline silica from bricks and cement or other masonry products
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles. (California Health &
Safety Code § 25249.5, et seq.)
15. The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
saVe these instructions.
REV 08b