haier HTX25S31 - Manual (Page 9)

Skip :Press VOL(+) button or VOL(-) button to add or delete the channel from the
stored memory.
Current Ch. : Press VOL(+) button to go up and VOL (-) button to go down to set the
channel position. The display will show the current playing channel.
Fine: If the picture and/or sound are poor, try using the FINE TUNE feature.
Do not use this feature unless reception is poor. Press VOL (+/-) to start the Fine
Tune function.
Auto Program: Press VOL (+) button or VOL (-) button to auto program in channels.
This search automatically adds only the active channels in your area to the TV's
memory. It deletes any channels on which there is no broadcast or a poor signal.
Note: The Auto Search function will scan the channels on the selected antenna
input. If the TV is connected to cable, please select Cable under Antenna.
Calendar:
Your TV has been designed with a calendar. By pressing MENU button ,and then
pressing VOL-/+ button it will bring you to Calendar. You will see the following
display on TV screen.
Calendar
OCT OCT OCT
Follow the procedure below to adjust the Calendar :
1.
+/- buttons Press the CH to select the year
item, the month item or the date item.
2. Press the VOL-/+buttons to change
calendar setup (1901.1.1-2099.12.31).
3. Press EXIT button to exit the calendar mode.
V-CHIP Set UP:
Press the MENU Button on your remote control to go to Password menu, then input
the password (0000). It will bring Parental Lock set up display on the screen. You
will see the following menu on your screen:
Parental Lock
Parental Lock off
TV Rating
MPAA Rating
Lock Menu
Change Password
O C T
O C T O C T
Passsword
Password ----
O C T
O C T O C T
This function enables you to block certain TV channels in accordance to the V-CHIP
requirement established by the FCC.
English
8