haier HTX25S31 - Manual (Page 8)

Language: Use VOL(+/-) to select the OSD in either English, French or Spanish.
Background: Press the VOL (+/-) buttons to select between Background ON or Background
OFF. When the Background ON function is chosen, a moving"NO SIGNAL" sign will
be displayed if there is no input signal to the set.
Black Stretch: Press VOL (+/-) buttons to turn the Black Stretch feature on or off. When the
Black Stretch function is on the screen automatically increases the contrast range.
VNR: Press VOL (+/-) buttons to turn the VNR function on or off. VNR is a term for Video
Noise Reduction, a built-in device on the set that reduces video noise interference
so the viewer is assured a clear picture.
C.Caption: Press VOL (+/-) buttons to select the Closed Caption options. Closed
Captioning helps the hearing impaired with the broadcast program, as well as helping
children learn how to read. A built in decoder displays the audio portion of a program
as text on the screen when this option is selected.
OFF: When OFF is displayed on TV means C.Caption is turned off.
CC1: When CC1displays on TV means C.Caption is turned on.
CC2 to CC4: For other modes of video related broadcast information.
T1: For program guide and other information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
T2 to T4 :For other modes of information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
Note: Select CC1 for full translation of the primary language such as English in your
area. Select CC2 for secondary language translation such as Spanish or any other
language that may be broadcast in your area.
Demo mode: This will display the main functions of the TV set.
Channel set up:
By pressing MENU button ,and then pressing VOL-/+ button it will bring you to
Channel Set Up. You will see the following display on TV screen.
O C T
O C T O C T
Channel
Antenna TV
Skip off
Current Ch. 2
Fine
Auto Program
Channel System Auto
Follow the procedure below to select above
options:
1.Press the CH(+) and CH(-) button to go up
and down the menu.
2.Press VOL (+) button or VOL (-) button to
select your preference.
Channel System: Press the VOL(-/+) buttons to select the correct channel system.
In general, you can set it as "AUTO" AUTO,NTSC and NTSC443 will
display in turn
Antenna: Press VOL (+) button or VOL(-) button to select TV or CATV.
Channel Coverage by Antenna:
Antenna Type Channel Range
VHF 2-13
UHF 14-69
CATV 1-125
English
7