Husqvarna Walk-Behind Snow Thrower ST 121E/96183000100 - Manual (Page 31)

31
REPAIR PARTS SNOW THROWER - - MODEL NUMBER ST 121E (96183000100)
FRAME ASSEMBLY
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
KEY PART
NO. NO.
QTY DESCRIPTION
1 532 44 21-59 1 ENGINE.208.LCT.ESTRT.W/ALT
2 532 44 47-23 1 FRAME.WELDMENT.SSST
3 532 44 28-25 2 WHEEL.HUSQVARNA
4 532 43 54-17 2 NUT.PUSH.AXLE.0.5IN
5 532 43 55-78 2 SCREW.5/16-24 X 2.00"HHCS
6 532 15 04-06 2 BOLT.ENG. 3/8-16 X 1.280
7 532 19 17-30 3 NUT.HEX.FLANGE.1/4-20.CTR.LOCK
8 872 11 04-07 3 BOLT.RDHD.SQNK.1/4-20 UNC X 7/8
9 532 44 29-42 1 BAR.SCRAPPER.HDPE
10 532 43 48-57 2 SPACER.ENGINE
11 532 43 48-74 1 LEVER.CHOKE
12 819 09 10-16 3 WASHER.9/32 X 5/8 X 16 GA.
13 532 44 21-46 1 SKIRT.SCRAPPER.SSST
14 532 44 34-23 1 SUPPORT.SSST.REAR.FRAME
15 532 44 22-50 4 TORX.1/4-20 X 3/4.SCREW