Harbor Freight Tools 37822 - Manual (Page 10)

Bench Grinder For technical questions, please call 1-800-444-3353. Page 10
3. Installing Bracket to Eye Shield -
a.
FIGURE 3
Select one flat bracket and one eye
shield. Assemble as shown in Fig-
ure 3.
b. Repeat for left eye shield.
4. Installing Eye Shield to Grinder -
a. For installation of the right eye shield
(19), make sure that the holes in the
eye shield bracket face downward.
b.
FIGURE 4
Push eye shield bracket onto mount-
ing bracket until it locks into place as
shown in Figure 4.
c. Repeat for left eye shield.