Harbor Freight Tools 9592 - Manual (Page 2)

PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and
assembly diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep this manual and invoice in a safe
and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
SKU 09592 PAGE 2 REV 04/04
Item Description
Product Capability For use with 3 HP, 3400 RPM (not included)
Pump Stage Single
Maximum Pressure 140 PSI
Maximum Intake Capacity 8.05 CFM
Pump RPM 1,200 RPM
Cylinder Design Twin
Stroke 1.57”
Oil Capacity
28.73 ounces
Shaft Diameter 15/16”
Mounting Holes Qty. 4 / 3/8” Diameter /
Bolt Pattern: 5-1/2” L x 7-1/2” W
Lubrication System Design Splash
Construction
Aluminum Head, Pump, Flywheel / Cast Iron Sleeve
Pulley Design / Size Belt Driven
10-5/8” Dia. X 1/2” Belt, CCW Rotation
Weight 23.25 Pounds