How to use, Polarized plug, Handle positions cleaner description – Hoover Breathe Easy User Manual

Page 7

2-1

2-2

2-3

2. How to use

The assembled cleaner will look like the drawing.

1. Handle
2. Cord hooks

: wrap cord around hooks for

storage. The top hook can be rotated right or left
for easy cord release.

3. Extra belt storage:

inside bag compartment

4. Bag door latch
5. ON/OFF switch

: located on side of handle.

6. Bag door
7. Stair cleaning handle

: located on lower edge

of bag.

8. Handle release lever

: step on lever to lower

handle to operating or low position.

9. Cleaner body
10. Nozzle control knob

: slide knob to correct

setting for height of carpet being cleaned.

11. Headlight
12. Furniture guard

: helps prevent cleaner from

marking furniture.

13. Hose door

: open door to connect hose to

cleaner.

14. Hood
15. Hose
16. Tool rack
17. Dusting brush
18. Extension wand
19. Furniture nozzle
20. Crevice tool

Operate cleaner only at voltage specified on
bottom plate on bottom of cleaner.

Polarized plug

To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. Do not change the
plug in any way.

To turn cleaner on, push switch up.
To turn cleaner off, push switch down.

Plug cord into electrical outlet.

Turn cleaner on and, with handle in
upright position, pull back on handle
until front of cleaner is lifted off the
carpet. This insures that the filter bag is
inflated.

The handle of your cleaner has three
positions;

upright

for storage and when

using cleaning tools;

operating

for gen-

eral operation on carpet and floors;

low

for reaching under low furniture. Step on
handle release lever to lower handle.

Handle positions

Cleaner description