Hawking Technology HWPS1UG - Manual (Page 162)

10.5 Other Commands
10.5.1 ipconfig
The “ ipconfig ” command is used to quickly get the IP settings
(IP, subnet mask, default gateway) of the print server:
admin# ipconfig
IP_ADDR=192.168.2.1
SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.2.254
10.5.2 reboot
The “reboot” command is used to restart the print server:
admin# reboot
10.5.3 exit
The “exit ” command is used to leave the print server telnet
management:
admin# exit
10.5.4 help
The “help ” command is used to list all telnet management
commands of the print server:
admin# help