HONDA Accord: Remote Engine Starter System - Manual (Page 26)

26
5412151K
Transmitter Battery Replacement
1. Release the battery cover lock.
2. Remove the battery cover.
3. Remove the old batteries.
4. Install two new lithium batteries (CR2032) into the
transmitter with the positive (+) mark toward the
battery cover.
5. Install the battery cover and lock it.
6. Push the lock button on the transmitter. The buzzer
should sound indicating that the batteries are
installed properly.
Perchlorate material special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
Battery cover
Lock
(move.)
Lithium battery (2)
CR2032
NOTE: When replacing batteries, do not mix new battery
with an old one.