Honeywell ST 3000 SMART TRANSMITTER STR93D - Manual (Page 16)

34-ST-03-57
Page 16
Model Selection Guide (34-ST-16-34)
Model Selection Guide
34-ST-16-34 Issue 36
Instructions
● Select the desired Key Number. The arrow to the right marks the selection available.
● Make one selection from each table, I and II, using the column below the proper arrow.
● S elect as many Table III options as desired (if no options are desired, specify 9X).
● A (Š) denotes unrestricted availability. A letter denotes restricted availability.
● Restrictions follow Table IV.
Key Number
_ _ _ _ _ _
- _ _ _ - _ _ _ _ _ _ _ _ _ _ _ _ - _ _, _ _, _ _ +
KEY NUMBER
* Remote seal system pressure rating is body rating or seal rating, whichever is less.
Important Note:
TABLE I - METER BODY
1 _ _ • •
2 _ _ •
3 _ _ •
5 _ _ 8 8
_ 1 _ • •
_ 2 _ q q
Construction
_ _ A •
_ _ D y
_ _ A •
_ _ D y
_ _ C 7
See Specification Sheet 34-ST-03-57 for figures on construction.
In-Line Gauge Dual Head DP All Welded
III (Optional)
2 Remote Seals
1 Remote Seal (High Side)
316 SS
Silicone (DC 200)
CTFE
Value Added Model (VAM unit)
Non-Wetted Material
1 Remote Seal (Low Side)
316 SS Heads for Close-Couple connection Dual Head DP
Fill Fluid (Meter Body)
0-20 to 0-500 psig/0-1.4 to 0-35 bar
Description
316 SS for Close-Couple
316 SS Heads
Avail.
Selection
Base STR models no longer include a default communications option. All units now require the
selection of a communication option from Table III (AN, DE, HC, H6 or FF).
Selection
IV
STR94G
STR93D
I II
Body Rating*: 500 psi (35 bar)
Body Rating*: 750 psi (51.7 bar) Compound Characterized
Description
0-25" to 0-2,700" H
2
O/0-62.2 to 0-7,000 mbar
XXXX
316 SS with all-welded meter body
Number of Seals
In-Line Gauge