beautypg.com

Harbor Freight Tools 91772 User Manual

Page 4

background image

SKU 91772

For technical questions, please call 1-800-444-3353.

Page 4

12.

Avoid accidental starting.

Be sure the Power Switch is off before plugging

in.

Carrying power tools with your finger on the Power Switch, or plugging in

power tools with the Power Switch on, invites accidents.

13.

Remove adjusting keys or wrenches before turning the power tool on.

A

wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.

14.

Do not overreach. Keep proper footing and balance at all times.

Proper

footing and balance enables better control of the power tool in unexpected
situations.

15.

Use safety equipment. Always wear ANSI-approved eye protection, face
mask/respirator and protective clothing while spraying.

TOOL USE AND CARE

16.

Use clamps (not included) or other practical ways to secure and support
the workpiece to a stable platform.

Holding the work by hand or against your

body is unstable and may lead to loss of control.

17.

Do not force the tool. Use the correct tool for your application.

The correct

tool will do the job better and safer at the rate for which it is designed.

18.

Do not use the power tool if the Power Switch does not turn it on or off.

Any tool that cannot be controlled with the Power Switch is dangerous and must
be replaced.

19.

Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the tool.

Such preventive

safety measures reduce the risk of starting the tool accidentally.

20.

Store idle tools out of reach of children and other untrained persons.

Tools

are dangerous in the hands of untrained users.

21.

Maintain tools with care. Keep tools clean.

Do not use a damaged tool. Tag

damaged tools “Do not use” until repaired.

22.

Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using.

Many accidents are caused by poorly main-

tained tools.