haier P60A11-AK - Manual (Page 29)

Adjust Menu
27
Auto Adjust
Clock
Phase
H-Position
V-Position
I/P Info.
1366x768@50Hz
Picture Sound Adjust Tuning Function Timer
>>>
0
50
50
0
1
Press MENU button and then use VOL+/- button to select
Adjust menu .
2
Press the VOL+ button and then use CH+/- button to select
the item to be adjusted, then press the VOL+/- button to adjust
the desired value.
In VGA input mode , H-Position and V-Position can be used to adjust the picture
position.
When VGA HDMI input mode is set
Auto Adjust
This is used to reset the default setting parameters (After
the operation, Auto Adjusting will be display on the screen)
Clock
This is used for adjusting H Position and V Position as well
as relative parameters in VGA modes.
Phase
This is used for adjusting the phase of pixel clock in VGA
mode.
H Position
Horizontal position of picture can be adjusted in this item.
V Position
Vertical position of picture can be adjusted in this item.
Note:
1.As adjusting H position or V position parameter, It is
natural that the picture will have faintness once in a
while if the range is more, then to adjust contrarily to
normal position.
2.As the frequency of display differ in PC device
you
may select the appropriate frequency to obtain desired
effect. If the signal of receive is excess, the picture can
be not displayed or wrong on the screen.