Humminbird 595C - Manual (Page 33)

59
Setup Menu Tab
From any view, press the MENU key twice to access the tabbed
Main Menu System, then press the RIGHT cursor key until the
Setup tab is selected.
NOTE: Menu choices will vary depending on system settings such
as whether the unit is set for Advanced User mode and what
accessories are attached to the unit.
NOTE:
Units - Temp (International Models Only)
Units - Distance (Only if Temp/Speed is Connected)
Units - Speed (Only if Temp/Speed is Connected)
Language (International Models Only)
Triplog Reset (Only if Temp/Speed is Connected)
Select Views (Advanced)
Select Readouts (Advanced, Sonar View Only)
Depth Offset (Advanced)
Temp Offset (Advanced)
Speed Calibration (Advanced, Only if Temp/Speed Connected)
Setup Menu
58
Alarm Tone
Alarm Tone selects the pitch of the alarm sound. A brief tone will
be produced as you adjust the Alarm Tone so that you can select the tone that you can hear best.
To change the Alarm Tone setting:
1. Highlight Alarm Tone on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone setting.
(High, Medium, Low, Default = Medium)
FF595_Man_531385-1_A_PrfE.qxd 12/9/2004 2:41 PM Page 64