Hobart Welding Products 000 - Manual

PROCESSES
Stick (SMAW)
Welding
Champion 10,000
All-in-One 10,000-Watt AC Generator and DC Welder 211801
June 2008
C ombining a 10,000-watt generator with a 230-amp
constant-current DC welder, the Champion 10,000
is ideal for farm, general construction, and emergency
power applica tions. This unit is designed for Stick
welding with quick and easy arc starts. It also performs
general scratch start DC TIG. The Champion 10,000
offers a “no-nonsense” warranty. The engine is
warranted separately by the engine manufacturer.
Rated output decreases approximately 3.5% per 1000 ft (305 m) above sea level. The rated output of any engine-driven welder/generator decreases as temperatures rise. The ratings for the
Champion 10,000 were taken at high temperatures, only after the machine reached operating temperature. Even in hot weather the Champion 10,000 has the vigor to let you finish the job.
FEATURES BENEFITS
You get a generator and welder for about what you would pay for just a generator!
Smooth arc starts with minimal “sticking”. Extraordinary motor starting characteristics. Strong continuous
rating to run compressors, pumps, lights, hand tools and other equipment.
Provides stamina and long dependable service. Enclosed design, large battery, rugged electrical
connections and wiring, and circuit-breaker protection.
Just over 3 ft long and weighs 10 – 20% less than competitive units.
Modern engines from Robin or Kohler, with 10-gallon fuel tank and low oil pressure shutdown as standard
features. Dependable engines conserve fuel and provide long operation before refueling.
Help maintain scheduled routine oil servicing (every 100 hours) and other preventative maintenance.
Easy to set up and start welding.
Primarily designed for the Stick process, the Champion 10,000 also provides a smooth arc for scratch start
DC TIG welding.
All-in-one 10,000-watt generator
and 230-amp welder
Innovative Hobart technology
Heavy-duty construction
Lightweight and compact design
Choice of OHV engines
A “no tools” oil change and
standard hour meter
Quick-set current control
Smooth DC weld output
210 amps at 25 V,
60% duty cycle
Rated Output
230 amps at 25 V,
30% duty cycle
Amperage Range
50 – 230 amps
Max. Open-Circuit Voltage
73 VDC
Dimensions
H: 33 in (838 mm)
W: 18-3/4 in (476 mm)
D: 37-1/2 in (953 mm)
Auxiliary Power
10,000 watts peak; 120/240 VAC, 60Hz,
9,500 watts continuous while not welding
Net Weight
Kohler:440 lb (200 kg)
Robin: 445 lb (202 kg)
SPECIFICATIONS (SUBJECT TO CHANGE WITHOUT NOTICE.) INDUSTRIAL
Engine Brand
Kohler
#500 434
Subaru/Robin
#500 433
Type
Twin-cylinder, 4-cycle, overhead-valve,
industrial, air-cooled, gasoline engine
Twin-cylinder, 4-cycle, overhead-valve,
industrial, air-cooled, gasoline engine
Horsepower (HP)
23 HP at 3600 RPM
(3-year mfg. warranty)
22 HP at 3600 RPM
(3-year mfg. warranty)
Fuel Capacity
10 gallons
10 gallons
Weld Speed
3750 RPM
3750 RPM
Idle Speed
2200 RPM
2200 RPM
Oil Capacity/Change
1.75 qt (1.7 L) every 100 hours;
2 qt (1.9 L) w/filter every 200 hours
1.6 qt (1.55 L) every 100 hours;
1.8 qt (1.75 L) w/filter every 200 hours
ENGINE SPECIFICATIONS (SUBJECT TO CHANGE WITHOUT NOTICE.)
Comes complete with 15 ft Work Cable and Clamp,
and 20 ft Welding Lead and Electrode Holder!
Hobart Welders
An Illinois Tool Works Company
U.S. Distributor Sales Phone 920-735-4576 FAX 800-637-2315
Hobart Retail Sales Phone 800-332-3281 FAX 937-332-4161
Canadian Sales Phone 888-489-9353 FAX 519-421-0480
International Sales Phone 920-735-4509 FAX 920-735-4125
Web Site HobartWelders.com