Harbor Freight Tools Chicago Electric Power Tools / Reciprocating Saw - 4.5 AMP 4095 - Manual (Page 2)

SKU 4095 For technical questions, please call 1-800-444-3353. PAGE 2
PRODUCT SPECIFICATIONS
ITEM DESCRIPTION
Electrical Requirements 120 Volt / 60 Hz / 4.5 Amps
Variable Speed
6 Positions / 0-2300 SPM (Strokes Per Minute)
Blade Stroke 1-3/16”
Shoe Plate Tilt 0-15°
Chuck Pin Type
Chuck Capacity 1/2” Standard Shank
Overall Dimensions 16-1/2”L x 3-1/4”W x 5-3/4”H
Weight 6.70 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assem-
bly diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.
GENERAL SAFETY RULES
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
ELECTRICAL SAFETY
4. Grounded tools must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. Never remove the grounding
E194601