Hunter Fan 30525 - Manual (Page 12)

41960-01 12
Troubleshooting
Technical Support
If you have any additional questions or problems with your Hunter air purifier, please call 1-
888-830-1326 from 8:00 am to 5:00 pm Central Time or contact us over the Internet at
www.hunterfan.com.
1. No display or operation.
2. Keypad does not work.
3. Erratic Display or
Operation.
4. Filter and/or Pre-filter
Indicator is Flashing.
5. HEPA Filter and/or Carbon
Pre-Filter Life Counter is
flashing 0%.
6. Unit has reduced air flow
or increased noise.
Problem Solutions
• Confirm that the unit is plugged in.
• Check the installation of the front grill.
• Reset the air purifier. (See Resetting the Air Purifier
on pg. 8.)
• Key pad has been locked to prevent accidental changes
to the programs. (See Keypad Lock on pg. 8 to unlock
the key pad.)
• Reset the air purifier. (See Resetting the Air Purifier
on pg. 8.)
• The Filter and/or Pre-Filter Life Counters have reached the
estimated usage times. Check and replace filters if needed.
(Refer to Filter and Pre-Filter Counters on pg. 7.)
• The Filter and/or Pre-Filter Life Counters have greatly
exceeded the estimated usage times. Check and replace
the corresponding filters.
• The filter is clogged and should be changed. (Refer to
Changing the Filter on pg. 10.)
41960-01_rev 1-13-06.pmd 1/13/06, 4:50 PM 12