Hunter Fan 44300 - Manual (Page 21)

Your thermostat can be programmed in two
different ways.
1. Auto-program method
2. Manual method
Before programming, position the
HEAT/OFF/COOL selector to the mode to be
programmed.
Auto-program method
In auto-program method, you can program
your thermostat instantly for the entire week
by simply pressing “Auto Prog.” key once.
When this key is pressed, the standard
program gets activated and your thermostat
is programmed automatically. The standard
program is shown in table 4.
If you wish to change this program to suit
your life style, you can do so by changing the
time and the temperatures of those programs
which you want to be different than standard
programs. The method is explained in the
manual method of programming.
Press . Your thermostat will be
programmed automatically according to Table 4.
(If the slide switch is in the heat mode, only
heat program is effective. In order to activate
cool program, slide the switch to cool mode
and press “Auto Prog.”)
Manual method
In this method, each program is inserted
according to your personal programming
schedule.
When the battery is first inserted, the
thermostat is programmed for 68°F (20°C) in
heat mode and 78°F (25°C) in cool mode.
NOTE: There are no energy saving time or
temperature settings.
Familiarize yourself with manual
programming. The following example
demonstrates the manual programming
method. You can program or change the
program of weekdays, weekends, or
individual days.
Programming Your Thermostat
PROGRAM
NUMBER
TIME TEMP IN F° (C°)
HEAT
COOL
1 5:00AM 68 (20) 78 (25)
2 7:00AM 60 (15) 85 (29)
3 3:00PM 68 (20) 78 (25)
4 10:00PM 62 (16) 82 (27)
1 5:00AM 68 (20) 78 (25)
2 10:00PM 60 (15) 85 (29)
3 3:00PM 68 (20) 78 (25)
4 10:00PM 62 (16) 82 (27)
AUTO
PROG
MON. –
FRI.
TABLE 4
SAT. &
SUN.