Huffy 1C4880-A01 - Manual (Page 6)

This Owner’s Manual is made for several different bicycles. Some of the illustrations may not look
exactly like the parts of the bicycle, but the instructions are correct. If the bicycle has any parts that
are not described in this manual, look for separate “
Special Instructions” that are supplied with the
bicycle. Make sure the rear wheel is centered in the bicycle frame.
Do not dispose of the carton and packaging until you complete the assembly of the bicycle. This can
prevent accidentally discarding parts of the bicycle.
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as seen by the rider while
seated on the bicycle.
Attach and use only HBC brand accessories and replacement parts on the bicycle.
Introduction
Tools Needed
Small Adjustable Wrench Large Adjustable Wrench
(Jaws must open at least 9/16 inch.) (Jaws must open at least 1 1/4 inch.)
Flat-blade Screwdriver Phillips Screwdriver
Slip-Joint Pliers Metric Allen Wrenches
(Needed on some models.)