Huffy M730131 - Manual (Page 9)

9 11/05 ID# M730131
5
4
While maintaining alignment, bounce middle pole section (5) into top section (4) using a
wood scrap as shown until the top pole no longer moves toward the pole identification
sticker on the middle pole. 2.
5
4
4
5
IMPORTANT!
Align dimple of top pole
section (4) into trough of middle
pole section (5) as shown.
Wood Scrap (NOT SUPPLIED)
THE IDENTIFICATION STICKER IS LOCATED 5" FROM
THE END OF THE POLE. WHEN PROPERLY POUNDED
TOGETHER, THE POLE SECTIONS SHOULD HAVE A
3-1/2" MINIMUM OVERLAP, LEAVING 1-1/2" BETWEEN
THE OVERLAPPING POLE AND THE IDENTIFICATION
STICKER.
CAUTION!
middle pole
1.5”
(3.81 cm)
middle pole
5”
(12.7 cm)
ID Sticker
Dimple
Trough
HOLE
Dimple