Hunter Fan 44260 - Manual (Page 19)

19
aTTaChing ThE ThErMoSTaT
Lift the thermostat cover and set the
SYSTEM switch
to
OFF
and the
FAN
switch to
AUTO
.
1. Locate the
HE/HG switch
on the back of the thermostat.
Set the switch to
HG
(default) for gas furnace and oil
burners. Set the switch to
HE
for electric furnaces.
(The switch has no effect when the system is set to
cooling mode.)
2. Locate the
Auto Recovery
switch on the back of
the thermostat. If you wish to use the Energy Star
compliant Auto Recovery feature, verify that the switch
is in the ENABLE position. If you do not wish to use
this feature, simply change the switch to the DISABLE
position. See pages 44-45 for more information.
3. System type - Locate the S
yStem
t
ype
switch on the
back of the thermostat. Select either STD (Standard) or
HP (Heat Pump) to match your system.
inSTalling ThE ThErMoSTaT, ConT.