HONDA FS5047 - Manual (Page 7)

ASSEMBLY
NOTE: Before mounting this rotary broom on your tractor, your tractor must be
equipped with an HTA Model QH5000 Quick Hitch.
: Before beginning assembly of this subf rame, please read the instructions
through completely and familiarize yourself with all the parts. After
completing assembly, torque all bolts according to the torque
specification table on page 21.
STEP 1: PREPARATION
a) Insert a parking stand (fig.1, item 1)
in each stand support from the underside.
Install a 5/32" x 1 1/4" cotter pin in
upper hole of each parking stand. Set
parking stands in most extended position
and secure each stand with a 4mm x 80mm
hairpin (fig.1, item 2).
b) Install adapter (fig. 1 , item 3 inside
broom female hitch. Secure with a 5/8"
nylon nut.
C) Attach support plate (fig.2, item 1) on
pin of lower left hand lift link. Secure
with
hairpin.
d) Assemble shackle (fig.2, item 2) with
cotter pin to chain and support plate
(fig.2, item 1).
e) Attach chain anchor plate (fig.2, item
3) to tractor frame (placing largest
hole in line with tractor front mounting
hole) using
three 5/16" x 1 bolts,
lockwashers and nuts.
f) Assemble shackle (fig.2, item 4) with
hairpin to chain and anchor plate.
FIGURE 1
FIGURE 2
OM 0180 6