Harbor Freight Tools VARIABLE SPEED 18 VOLT CORD- LESS DRILL/HAMMER DRILL 65949 - Manual (Page 2)

SKU 65949 for technical questions, please call 1-800-444-3353. PAGE 2
PRODUCT SPECIfICATIONS
Power Source
18 VDC; 1.7 Ah, NiCd
Battery
Charge Time
5 hours (Initial)
3-5 hours (Recharging)
Charger Input 120 VAC / 60 Hz / 1.8 A
Chuck Type 1/2” Single Sleeve Keyless
Torque Settings 16
Variable Speed 0-300 & 0-1200 RPM
Maximum Torque 20-1/2 ft./lb.
Reversible Yes
Trigger Lock Yes
Weight 5.5 Pounds
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAfETy RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
failure to follow all instructions listed below may result
in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the pres- 2.
ence of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep bystanders and children away while operating a power tool. 3. Distractions
can cause you to lose control. Protect others in the work area from debris such as
chips and sparks. Provide barriers or shields as needed.