Harbor Freight Tools 3914 - Manual (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. SKU 3914
to supply the correct current to the
tool without heating up. Otherwise, the
extension cord could melt and catch fire,
or cause electrical damage to the tool.
This tool requires use of an extension
cord with up to 10 amps capability (up
to 50 feet), with wire size rated at 18
awg. Longer extension cords require
larger size wire. If you are using the tool
outdoors, use an extension cord rated
for outdoor use (signified by “WA” on the
jacket).
Maintenance
18. . For your safety, service
and maintenance should be performed
regularly by a qualified technician.
People with pacemakers should
19.
consult their physician(s) before use.
Electromagnetic fields in close proximity
to heart pacemaker could cause
pacemaker interference or pacemaker
failure.
WARNING: The brass components of
20.
this product contain lead, a chemical
known to the State of California to cause
birth defects (or other reproductive
harm). (California Health & Safety code §
25249.5, et seq.)
the warnings, cautions, and
21.
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. it must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must be
supplied by the operator.
Sewing Safety precautions
Keep hands away from the needle when 1.
you turn the power switch on, or while
the machine is operating.
Do not place your fingers into the thread 2.
take-up cover while the machine is
operating.
Never leave the machine running and
3.
unattended.
During operation, never place your head,
4.
hair, or hands in the proximity of the
hand wheel, V-belt, bobbin winder, or
motor.
Do not operate the machine with any
5.
safety guards removed.
This machine shall only be operated by
6.
appropriately trained operators.
For your personal protection, we
7.
recommend you wear ANSI approved
safety glasses when using the machine.
If oil or grease comes in contact with
8.
your eyes or skin, immediately wash the
affected areas and consult a physician.
Tampering, modifying or altering any
9.
device (aside from the cord and plug by
a licensed electrician) on the machine is
prohibited and will void manufacturer’s
warranty.
Repair, adjustment, and specific
10.
maintenance shall only be performed by
a qualified service technician. Alteration
or replacement of the 3 prong grounded
electrical plug provided with the machine
must only be performed by a licensed
electrician. This machine must be
properly grounded.
This sewing machine is only to be used
11.
for the purpose intended.
reV 07a, 10b