Hearth and Home Technologies 6000 Series - Manual (Page 7)

6000 Series Specifications
Dimensions above are in inches. Reference dimensions only. We recommend measuring individual units at installation. Assumes the use of 1/2" drywall. NOTE: Combustible material
should not be installed over the face. Make sure you do NOT cover the decorative door opening.
Refer to installation manual for detailed specifications on installing this product. Heat & Glo reserves the right to update units periodically. The flame and ember appearance may
vary based on the type of fuel burned and the venting configuration used. Pictures in this brochure are not a true representation of the fireplace and/or flames.
MODEL HEIGHT FRONT WIDTH BACK WIDTH DEPTH GLASS SIZE Btu/Hour Input
6000GCF
Actual Framing Actual Framing Actual Framing Actual Framing
36 x 24-3/4 20,000-30,000
38 44-3/4 41-1/8 42 28-1/2 42 21-1/2 22
Top View
Top View Corner Installation Framing
Front View
Side View
Side View
MODEL HEIGHT FRONT WIDTH BACK WIDTH DEPTH GLASS SIZE Btu/Hour Input
6000GLX
6000GL
6000G
Actual Framing Actual Framing Actual Framing Actual Framing
36 x 24-3/4
6000GLX
6000GL
6000G 18,700-40,000
19,000-30,000
18,200-30,000
38 38-1/2 41 42 28-1/2 42 21-1/2 22
6000G
Top View Corner Installation 6000G
Top View Corner Installation,
Top Vent
6000G
Top View
Framing
Front View
Side View
Side View
Top View
Note: 6"
minimum vertical
vent run required
6000GLX
6000GL
6000G