Hitachi 55HDT52 - Manual (Page 46)

On-Scr
een Display
46
Set Black Side Panel
The BLACK SIDE PANEL function turns the gray side
bars on/off when watching 4:3 signals in Standard
mode or use of the PIP modes.
1. Press the CURSOR PAD ̇ or ̈ to set to ON or OFF.
2. Press EXIT to quit menu or select SET BLACK SIDE
PANEL to return to the previous menu.
NOTE: To prevent uneven aging when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is
recommended to watch 4:3 signal with gray side bar.
Reset Video Settings
This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO
mode.
1. Use CURSOR PAD ̆, ̄ or CHANNEL WHEEL to
highlight functions.
2. Press the SELECT button or CURSOR PAD
̈ to select
Reset Video Settings.
3. Use the CURSOR PAD ̄ to access at the Reset
softkey.
4. Press the SELECT button to Reset the Video Settings.
You can customize each of the Video Inputs to your
preference to increase viewing performance and pleasure,
depending upon the video program being viewed. If RESET
is selected, only the selected Input will reset to the initial
conditions as explained above.
If RESET is selected in Input 1, only Input 1 will return to
factory conditions.
NOTE: If YES is selected, the VIDEO MENU SETTINGS
will be reset to the original factory settings on all
modes during the next power on/off.
Video
Next On/Off
Set Black Side Panel
SEL Return
̇ Off ̈
Next On/Off
Set Black Side Panel
SEL Return
̇ On ̈
Reset Video Settings
Video
Move SEL Return
Select “Reset” to return the video menu settings
on this Input to the original factory settings.
Reset
Select “Yes” to fix the Video Menu Settings
to the original factory Settings on all modes
after power “ON”.
No Yes
Reset Video Settings
Black Side Panel
Aspect
Auto Movie Mode
Noise Reduction
Contrast Mode
Black Enhancement
Color Temperature
Sharpness
Cable Video
Move SEL Return
50%
High
High
Dynamic
Low
Off
Off
OR
OR