haier HDB24EA - Manual (Page 9)

8
Normal Wash Cycle:
• This cycle is used for normal amount of soiled dishware, glassware and
silverware.
Rinse & Hold Cycle:
• This cycle is used for rinsing partial loads that will be washed later
Note: Do not use detergent or Heated Dry feature with the Rinse & Hold
cycle.
Dry/Plate Warmer Cycle:
• To use plate warmer feature, fill the racks with clean, dry plates. Turn the
control knob to dry and put the Heated Dry to the “on” position. When
the cyle is complete, the dishes will be warm and ready for serving.
Warning
: Handle with care for some plates may be too hot to handle
with bare hands.
Heated dry option
• Activating this option will turn on the heating element to hasten the
drying process.
HDB24VA
Heated Dry button:
• Activating this will turn on the heating element to hasten the drying
process. This needs to be “on” when using plate warmer feature.
Hi-Temp Wash button:
• Activating this will raise the temperature of the water above 140˚F
before the main wash. This is mostly used for greasy/oily loads.
Hi-Temp Rinse button:
• Activating this feature will raise the temperature of the water to above
140˚F before the last rinse cycle. This will help to dry the dishes faster
and will reduce water stain.
English