Harbor Freight Tools Windsor Design 60" Workbench 69054 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. Item 69054
table of Contents
Safety ......................................................... 2
Specifications ............................................. 3
Setup .......................................................... 3 Parts List and Diagram .............................. 10
Warranty .................................................... 12
WaRninG SYmBOlS anD DeFinitiOnS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
impORtant SaFetY inFORmatiOn
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
1. Do not exceed weight capacities for the
Workbench shelves and drawers. Be aware of
dynamic loading! Sudden load movement may
briefly create excess load causing product failure.
2. Use only on flat, level and hard surface
capable of supporting the Workbench and
any item(s) placed on Workbench. Evenly
distribute load on Table to avoid tipping.
3. Use as intended only. Do not use Workbench to
perform task for which it was not designed.
4. For indoor use only.
5. Assemble only according to these instructions.
Improper assembly can create hazards.
6. Wear ANSI-approved safety goggles and heavy-
duty work gloves during assembly and use.
7. Keep assembly area clean and well lit.
8. Keep bystanders out of the area during assembly.
9. Do not assemble when tired or when under
the influence of drugs or medication.
10. This product is not a toy. Do not allow children
to play with, on or near Workbench.
11. Inspect before every use; do not use
if parts are loose or damaged.
12. Maintain product labels and nameplates.
These carry important safety information. If
unreadable or missing, contact Harbor
Freight Tools for a replacement.
Save theSe inStRuCtiOnS.
Sa
Fet
Y
Ope
R
ati
O
n
m
aintenan
C
e
Setup