Humax VA-ACE - Manual (Page 30)

Guide of Main Menu
When you enter the Satellite Name that is set in Antenna Setting
menu, search all of the selected satellite without inputting the
extra frequency.
Select the target antenna for Automatic Service Search.
The attribute of this antenna alternative number is already set
in Antenna Setting menu and the Satellite Name is helpful in the
selection of the antenna, but in this menu you cannot change
the Satellite Name.
Option to search only Free-To-Air services.
The picture on the right tries to search with varying Frequency,
Symbol Rate and FEC etc.
• You can select one of two modes(Quick or Detail).
• When you select Quick mode, it searches the service by search
parameters that is preset.
• When you select Detail mode, it searches the service through all
field of tuner(950 - 2150MHz).
Detail Mode
The pre-fixed symbol rate list is changed according to Antenna
Alternative and Satellite Name. If you want to add or change it,
press the Red( )button.
** The value of Pre-fixed symbol rates can not be editable.
(22000, 27500)
The picture of the Symbol Rate Add/Change mode is as follows:
1. When you press the Red( )button after entered to detail
mode from search type, yellow box will be trimmed with red
edges meaning edit is possible.
2. You can easily put optional value with using
Numeric buttons(0~9).
Automatic Search
Antenna Alternative
Automatic Skip
Search Type
E29