Hotpoint HDA829 - Manual (Page 5)

●
For WARMER
cycle:
a. Load clean plates and dishes to
be warmed.
b. Select DRYING HEAT ON.
WASH .
ON .
OFF ● ●
o
●
c. Leave the door unlatched.
d. Slowly turn Cycle Indicator Dial
clockwise to DRY/PLATE
WARMER position.
e. Latch the door to start the cycle.
What happens in each cycle
●
You’11 hear occasional clicking
sounds:
—Soft food disposer shredding
action.
—Drain valve opening to pump
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
Cycle selection hints
is important to follow the loading
instructions on pages 8 9.
POTS & PANS—For items such as
pots, pans, cookware, dishes and
glasses with heavy soil. Everyday
dishes
be included.
NORMAL WASH—For most
loads of everyday dishes, glasses
and cookware with
LIGHT WASH—For dishes that
have been
before
loading. Also, washing
soiled dishes with soils that
have not dried on.
●
During the drying period:
—The motor stops.
—Water vapor comes through the
vent during drying and when
water is being pumped out.
RINSE HOLD—For
rinsing partial loads which
be washed later.
DRYING HEAT OFF.
DRY/PLATE WARMER—For
warming clean dishes and
serving plates for the serving
of hot food.
Water Use Cycle Time
Gallons Minutes
Wash Cycles ) Sequence
POTS & PANS 12.1
i Main
74 Rinse
,
-1 ,
Drying Options:
DRYING HEAT Available on all wash RINSE & minutes to
cycle time.
DRYING HEAT OFF. Drying heater is turned Dishes dry naturally.
5