Using the remote to control dvd functions, The remote control, My dvd player code is – Hitachi 51S500 User Manual
Page 33
33
THE REMOTE CONTROL
USING THE REMOTE TO CONTROL DVD FUNCTIONS
Operating the precoded function for your DVD player.
This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of
your DVD player (refer to page 36 for pre-codes).
1.
Turn ON your DVD player.
2.
Aim the remote control at the front of your DVD player.
3.
Press and release the DVD button to switch to DVD pre-coded mode.
4.
Hold down the DVD button on the remote and enter the two digit preset code that matches your DVD player, as shown on page 36.
The indicator light will flash 3 times if the code was accepted.
5.
Aim the remote at the DVD player and press the POWER button. The remote will turn off your DVD player when the correct two
digit preset code is entered. When this occurs, the remote control is programmed for your DVD player. If the DVD player does not
turn off, try a different two digit preset code.
6.
The remote will now control your DVD player.
7.
You will need to set the display type of your DVD player to 16:9 widescreen.
NOTES:
1.
If your DVD player cannot be operated after performing
the above procedures, your DVD player’s code has not
been precoded into the remote.
2.
In the unlikely event that your DVD player cannot be
operated after performing the above procedures, please
consult your DVD player operating guide.
3.
The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
ቢ
DVD Button
This button allows the remote to control your DVD player by
setting it to DVD mode.
ባ
PRECODED DVD Buttons
These buttons transmit the chosen precoded DVD codes.
ቤ
EXCLUSIVE TV Buttons (except number buttons)
These buttons are for operating the TV. The number buttons
can also be used to operate your DVD player.
ቢ
ባ
ቤ
ቤ
ባ
ቤ
POWER
TV
VCR
CBL
DVD
1
2
4
5
6
3
7
8
9
0
INFO
SLEEP
PHOTO
EXIT
MENU
CH
VOL
MUTE
PIP
SURF
SWAP
FREEZE
PIP MODE
PIP ACCESS
DAY/NIGHT
SOURCE WIZARD
REC
SELECT
C.C.
ASPECT
STB
ANT
LAST CH
VID 1
VID 2
VID 3
VID 4
VID 5
PVR
CD
AMP
VIRTUAL HD
MY DVD PLAYER CODE IS:
NOTE:
Refer to instruction manual of the DVD player for operation of the buttons exclusively for the DVD player.