Huffy Pool System - Manual (Page 10)

10
P/N 21198503 06/05
4.
Install rod (5) through holes in bottom pole section (4) and eyebolt (6).
h03.EPS
7
8
6
8
7
4
6
10
6
8
7
5.
2
29
29
3
3
9
Install wheel axle (2) through wheel carriage (9) and install wheels (3) onto
wheel axle (2) with spacers (29) as shown. Insert pole assembly into tank
assembly as shown. Secure bottom pole (6) to tank and wheel bracket as
shown, a deep socket is recommended. IMPORTANT! DO NOT OVER
TIGHTEN.
TWO PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY
DAMAGE.
WARNING!
THE SPACER (29) WILL
FIT LOOSELY UNTIL
SECURED INTO THE
CAVITY OF THE BASE.
IMPORTANT!: