Harbor Freight Tools 97028 - Manual (Page 6)

Page 6 SKU 97028 For technical questions, please call 1-800-444-3353.
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
saVE THEsE iNsTruCTiONs.
sPECiFiCaTiONs
Construction Materials
Stand/Mounting Bracket: Formed Steel
Anvil Shaft and Anvils: Machined Steel
Air Hammer: Die-Cast Aluminum
Air Hose: Black Braided Reinforced
Rubber w/Crimped Brass Fittings
Mounting Plate Thickness 11 Gauge Steel Plate
Air Inlet Size 1/4” X 18 NPT (Female)
Activation Method Variable Speed Remote Foot Pedal
Maximum Air Pressure 100 PSI
Air Consumption 90 PSI @11 SCFM
Blows Per Minute 700
Net Weight 16.20 lb
Hose Length 13 ft.
uNPaCkiNg
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
sET uP iNsTruCTiONs
read the ENTirE imPOrTaNT saFETY iNFOrmaTiON section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.