Attaching the thermostat – Hunter Fan SET & SAVE 44155C User Manual

Page 19

Text mode
Original mode

aTTaChing ThE ThErMoSTaT

Lift the thermostat cover and set the

SYSTEM switch

OFF

and the

FAN

switch to

AUTO

1. Locate the

HE/HG switch

on the back of the thermostat.

Set the switch to

(default) for gas furnace and oil

burners. Set the switch to

for electric furnaces.

(The switch has no effect when the system is set to

cooling mode.)

2. Locate the

Auto Recovery

switch on the back of the

thermostat. If you wish to use the Auto Recovery
feature, verify that the switch is in the ENABLE position.
If you do not wish to use this feature, simply change the
switch to the DISABLE position. See pages 44-45 for
more information.

3. System type - Locate the

yStem

ype

switch on the

back of the thermostat. Select either STD (Standard) or

HP (Heat Pump) to match your system.

inSTalling ThE ThErMoSTaT, ConT.