beautypg.com

How the hepa system works, Operating your air purifier, Filter replacement – Hunter Fan 30245 User Manual

Page 4: Locking the air purifier

background image

4

©2010 Hunter Fan Co.

42018-01 20100609

How THe HePa SySTem workS

The above is an illustration of how the

HEPA™ air purification system works. Dust

and other irritants are pulled into the air

purification system and cleaned through the

Carbon Pre-Filter and HEPA™ Filter. Clean,

purified air is then released into the room

through the top grill.

oPeraTIng your aIr PurIfIer

The display and control keys allow for easy

operation of the air purifier.

UP/DOWN KEYS: Adjusts the

blower speed and turns the unit on

and off.

Pre-filter Reset: Resets the

Carbon Pre-Filter Life Counter.

FILTER RESET: Resets the

HEPA Filter Life Counter.

Use the UP/DOWN keys to adjust the blower

speed to the desired level

=

Off

=

Low

=

Medium

=

High

fIlTer rePlaCemenT

The pre-filter and filter are critical to the

proper operation of the air purifier. To help

you know when to change the filters, your

Hunter Air Purifier has Filter Life Counters that

will monitor the percentage of life your filter

has left. Although the exact life of the filters

depends on the environment, the table below

gives typical usage times of the filters.

Filter Type

Typical Usage

Carbon Pre-Filter

2000 Hours

HEPA Filter

8000 Hours

The display shows the percentage of life left

since the counter was reset.

NOTE: The percentage level drops in 5%

increments.

The values of the Pre-Filter and Filter Life

Counters are stored in the air purifier’s

memory.

Note: The unit may be unplugged and moved

or stored without losing the Pre-Filter and

Filter Counter values.

To properly track filter usage, the Pre-Filter

and Filter Life Counters should be reset each

time the filters are changed.

loCkIng THe aIr PurIfIer

Once you enter the desired speed, you may

want to lock the keypad to prevent accidental

changing of the speed. When the keypad is

locked, all keys will be disabled. If you press

a key, the Keypad Locked Indicator will be

displayed on the screen for 1-2 seconds.

1. To lock the keypad, press and hold the

UP/DOWN keys simultaneously for 2-3

seconds. The Keypad Locked Indicator

will appear on the display. Refer to Figure

3. After releasing the keys, the Keypad

Locked Indicator will disappear.

Figure 3.

Dust & Irritants

Pollens & Allergens

Odors

Bacteria

Pet Hair & Dander

Carbon

Pre-Filter

Ture HEPA Filter

99.97% - 0.3 Microns

Figure 2.