Harbor Freight Tools CENTRAL PNEUMATIC 40131 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. Item 40131
WaRninG SYmBOlS anD DeFinitiOnS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
imPORtant SaFetY inStRuCtiOnS
inStRuCtiOnS PeRtaininG tO a RiSk OF injuRY tO PeRSOnS
WaRninG – When using hose reels, basic precautions should always be followed, including the following:
to reduce the risk of injury to persons, read all the instructions before using the tool.
Work area
1. keep the work area clean and well lighted. 2. Keep bystanders, children, and visitors
away while operating the tool.
Personal Safety
1. Stay alert. Watch what you are doing and
use common sense when operating the tool.
Do not use the tool while tired or under the
influence of drugs, alcohol, or medication.
A moment of inattention while operating the
tool increases the risk of injury to persons.
2. Dress properly. Do not wear loose
clothing or jewelry. Contain long hair.
keep hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, or long
hair increases the risk of injury to persons as
a result of being caught in moving parts.
3. Do not overreach.
keep proper footing and balance at all times.
Proper footing and balance enables better
control of the tool in unexpected situations.
4. use safety equipment.
A dust mask, non-skid safety shoes and
a hard hat must be used for the
applicable conditions.
5. always wear eye protection.
Wear ANSI-approved safety goggles.
tool use and Care
1. Do not force the tool. Use the correct tool for the
application. The correct tool will do the job better
and safer at the rate for which the tool is designed.
2. Disconnect the tool from the air source
before making any adjustments, changing
accessories, or storing the tool. Such
preventive safety measures reduce the
risk of starting the tool unintentionally.
3. Store the tool when it is idle out of reach
of children and other untrained persons.
A tool is dangerous in the hands of untrained users.
Sa
Fet
Y
O
Pe
R
ati
O
n
m
aintenan
C
e
Setu
P