Hitachi VM-H100LA - Manual (Page 43)

Advanced Techniques - 43 -
1. Fit the screw of the monopod into the tripod mounting threaded socket of the recorder block.
2. Turn the knob to fix the recorder securely.
1. Loosen the tripod head retaining screw.
2. Fit the screw on the tripod head into the tripod mounting threaded socket of the camera block.
3. Turn the tripod head to tighten the camera block securely.
1. Loosen the tripod head 1. Loosen the monopod 1. Loosen the angle setting screw
retaining screw and adjust adjustment screws and and pull the monopod section in the
the rotation and angle of adjust the length. direction of the arrow.
the tripod head. 2. Turn the screws to tighten 2. After adjusting the angle, tighten
2. Turn the screw to fix the the monopod securely. the screw to fix the monopod securely.
tripod head securely.
Note: Be sure to hold the grip section firmly during adjustment.
Using the camera Mount
Maximum weight supportable: 2.2 lbs (1 kg)
Attaching the camera block Using in combination with the tiltable monopod
1. Fit the fixing screw into the tripod mounting 1. Fit the fixing screw of the monopod into the
threaded socket of the camera. tripod mounting hole of the camera mount.
2. Turn the knob to fix the camera securely. 2. Turn the tripod head to fix the camera mount.
When turning the tiltable monopod, you can easily
adjust the camera's tilt angle.
Attaching the Optional Wide or Tele Converter Lens
1. To remove the lens hood, turn it counterclockwise.