Hoover Wet/Dry Vacuum cleaner - Manual (Page 9)

If you have a
problem
If a minor problem occurs, it usually
can be solved quite easily by using
the checklist below.
Problem: Loss of suction or
air flow
Problem: Cleaner won’t run
Possible Cause
Possible Solution
• Not firmly plugged in.
•
Plug cleaner in firmly
• No voltage in wall plug.
•
Check fuse or breaker.
• Blown fuse/tripped breaker.
•
Replace fuse/redet breaker.
• Possible Cause
•
Possible Solution
• Obstruction in hose, wand or tool.
•
Clear obstruction.
• Clogged cartridge or foam filter.
•
Clean filter as described in
“Maintenance” section.
• Hole/split in hose.
•
Inspect and replace hose.
• Automatic shut-off engaged.
•
See “Automatic wet shut-off”
section
®
HOOVER y son marcas registradas
THE HOOVER COMPANY, NORTH CANTON, OHIO 44720
R1 4-98 S6530/45/50 Litho USA 56514-018
®
HOOVER et sont des marques déposées
THE HOOVER COMPANY, NORTH CANTON, OHIO 44720
HOOVER and are registered trademarks
THE HOOVER COMPANY, NORTH CANTON, OHIO 44720
®