beautypg.com

Service precautions – Harbor Freight Tools 67596 User Manual

Page 5

background image

Page 5

For Pressure Washer technical questions, please call 1-800-444-3353.

SKU 67546/67596

For engine technical questions, please call 1-800-520-0882.

14. Do not cover the engine or

equipment during operation.

15. Keep the equipment, engine, and

surrounding area clean at all times.

16. Use the equipment, accessories, etc., in

accordance with these instructions and in the

manner intended for the particular type of

equipment, taking into account the working

conditions and the work to be performed. Use of

the equipment for operations different from those

intended could result in a hazardous situation.

17. Do not operate the equipment with known

leaks in the engine’s fuel system.

18. This product contains or, when used,

produces a chemical known to the State of

California to cause cancer and birth defects

or other reproductive harm. (California

Health & Safety Code § 25249.5, et seq.)

19. WARNING: The brass components of this

product contain lead, a chemical known to

the State of California to cause birth defects

(or other reproductive harm). (California

Health & Safety code § 25249.5, et seq.)

20. When spills of fuel or oil occur, they must be

cleaned up immediately. Dispose of fluids and

cleaning materials as per any local, state, or

federal codes and regulations. Store oil rags in

a bottom-ventilated, covered, metal container.

21. Keep hands and feet away from moving

parts. Do not reach over or across

equipment while operating.

22. Before use, check for misalignment or binding

of moving parts, breakage of parts, and any

other condition that may affect the equipment’s

operation.

if damaged, have the equipment

serviced before use. Many accidents are

caused by poorly maintained equipment.

23. Use the correct equipment for the application.

Do not modify the equipment and do not use the

equipment for a purpose for which it is not intended.

24. The high pressure water flow can damage

the work surface if not used properly. Always

test the spray in an open area first.

25. When dispensing detergent, apply the detergent

to the cleaning area at low pressure only.

Detergent dispensing only works when the

spray wand is in the low-pressure position.

26.

Injection Hazard. The high pressure

water jet produced by this tool can cut

skin or cause injury to hands or eyes.

Do not allow spray to strike you and

do not spray toward people or

animals. Do not spray the tool itself or any

electrical wiring/receptacle.

27. This Pressure Washer is intended for

outdoor residential use only.

28.

in case of an emergency during use,

immediately release the trigger on the spray

handle, turn the engine off and then shut off

gas supply to the engine. Do not set the spray

handle down without turning off the engine.

vibration hazard:

This tool vibrates during use. Repeated or

long-term exposure to vibration may cause

temporary or permanent physical injury,

particularly to the hands, arms and shoulders.

To reduce the risk of vibration-related injury:

1.

Anyone using vibrating tools regularly or for an

extended period should first be examined by a

doctor and then have regular medical check-

ups to ensure medical problems are not being

caused or worsened from use. Pregnant women

or people who have impaired blood circulation

to the hand, past hand injuries, nervous system

disorders, diabetes, or Raynaud’s Disease should

not use this tool. If you feel any medical or

physical symptoms related to vibration (such as

tingling, numbness, and white or blue fingers),

seek medical advice as soon as possible.

2.

Do not smoke during use. Nicotine reduces

the blood supply to the hands and fingers,

increasing the risk of vibration-related injury.

3.

Wear suitable gloves to reduce the

vibration effects on the user.

4.

Use tools with the lowest vibration when there

is a choice between different processes.

5.

Include vibration-free periods each day of work.

6.

Grip tool as lightly as possible (while still keeping

safe control of it). Let the tool do the work.

7.

To reduce vibration, maintain the tool as

explained in this manual. If any abnormal

vibration occurs, stop use immediately.

Service Precautions

1.

Before service, maintenance, or cleaning:

a.

turn the engine switch to its “OFF” position.

b.

allow the engine to completely cool.

c.

then, remove the spark plug

wire(s) from the spark plug(s).

2.

Keep all safety guards in place and in

proper working order. Safety guards include

muffler, air cleaner, mechanical guards,

and heat shields, among other guards.

Rev 11c