Hamilton Beach 840155200 - Manual (Page 5)

5
Hour
Minute
Program/
Automatic Brew
ON/OFF Button
Indicator Light
The Automatic Shutoff feature
shuts off the Keep-Hot Plate 2 hours
after brew cycle begins. Always turn
Coffeemaker OFF and unplug
when finished.
This feature allows you to pour a cup
of coffee before the entire brew cycle
has completed. By removing the
Carafe, the flow of coffee from the
bottom of the Filter Basket will stop. CAUTION: Return carafe to Keep-Hot
Plate within 20 seconds. Hot water
continues to flow into the Filter Basket
when this feature is used. Overflowing
coffee and hot water are burn hazards.
1. Plug in Coffeemaker. The numbers
on the Clock will flash until the time
is set.
2. Press the H button until the current
hour is displayed. AM or PM will
appear on display. Press the M but-
ton until the current minute is
displayed. The Clock is now set.
3. To program Coffeemaker to auto-
matically begin brewing, press and
hold the Prog/Auto button for two
seconds to enter the setting mode.
While still pressing Prog/Auto, press
the H button to set hours and then
press the M button to set minutes
until the desired brew time is displayed.
4. To have Coffeemaker automatically
begin brewing at a preset time, press
Prog/Auto button momentarily. The
Prog/Auto button will glow green to
indicate Automatic Brew is set and
coffeemaker is ready to begin brew-
ing. “Auto” will appear in the display.
5. The Coffeemaker will shut off two
hours after brewing begins.
NOTES:
• The Automatic Brew feature must be programmed each time it is used.
• Make sure you have placed the desired amount of water and coffee in the unit
before using the Automatic Brew feature.
Control Panel (for clock models)
Additional Features
Pause ’N Serve
Automatic Shutoff
To Set the Clock and Program Automatic Brew
840155200 ENv01 7/7/06 1:53 PM Page 5