Defrosting – Hotpoint RZM64 User Manual
Page 12
Defrosting
12
Regular use of your appliance causes ice to gradually build up on internal surfaces
increasing the running costs of your appliance. When the ice is between 3-5mm (
1
/
4
inch) Hotpoint recommend ‘fully defrosting your freezer’.
Fully defrosting your freezer.
WARNING: Switch off the electricity supply and pull out the mains plug.
1.
Remove frozen food, wrap or cover it and place into insulated containers to
keep frozen whilst the freezer defrosts.
2.
Remove the storage drawers
3.
Insert the supplied defrost tube into the groove situated in the floor at the
front of the freezer. Place a container beneath the tube to collect the defrost
water.
4.
As the frost begins to melt, use the supplied plastic scraper to remove frost.
Never use sharp metal tools to remove frost as they may damage your
freezer beyond repair.
5.
Sponge out excess defrost water which collects at the bottom of the freezer.
NOTE : When defrosting is complete, clean the interior thoroughly,
see CLEANING section, next page.
6.
Replace storage drawers.
7.
Replace mains plug and switch on. Unwrap food and replace.
CLEANING &
MAINTENANCE