Philips HD7751 User Manual

Page 9

Press the start/standby button to start the brewing process.

Let the appliance operate until all the water has flowed into the jug.

, The coffeemaker produces 5 beeps when the brewing process is

finished.

Press the start/standby button to stop the brewing/ keep-warm

process.

Empty the jug.

using the appliance

Filling the water reservoir

Open the water reservoir lid and fill the water reservoir with the

required amount of cold water.

There are indications for 2 to 10 cups (275ml to 1375ml) on the water

level window and on the jug. You can use these indications to determine

how much water to put in the water reservoir. Keep in mind that the

amount of brewed coffee will be slightly less, since ground coffee absorbs

water.
Tip: Use the jug to fill the water reservoir with the required amount of water.

Note: Do not fill the water reservoir beyond the 10-cup indication, otherwise

water spills from the opening at the back.

using coffee beans

Always keep the water reservoir lid closed when you fill the coffee bean

container with coffee beans. Otherwise coffee beans can fall into the

water reservoir and block up the water inlet.

EnglisH