Philips HD7751 User Manual

Page 11

Press the STRENGTH button once or several times until the desired

coffee strength is selected (mild, medium or strong).

, The STRENGTH button lights up when you press it.

, The display shows the selected coffee strength.

Press the start/standby button to start the brewing process.

Keep away from the steam vent during brewing, as hot steam escapes

through the vent.

, The freshness indicator flashes on the display until the brewing

process is finished.

, The coffeemaker produces 5 beeps when the brewing process is

finished.

, The hotplate switches on automatically.
Do not touch the hotplate while it is on, as it gets hot.

Wait until the coffeemaker has stopped beeping before you remove

the jug from the hotplate.

Note: After brewing, coffee drips from the filter basket for several seconds.

, The freshness indicator is shown on the display for 30 minutes after

brewing, to indicate that the coffee is fresh.

If you do not need the hotplate to keep the coffee hot, press the

start/standby button to put the appliance in standby mode.

, The start/standby button stays on to indicate that the appliance is

still switched on.

Note: If you do not press the start/standby button to put the appliance in

standby mode, the appliance goes into standby mode automatically after 30

minutes. The start/standby button stays on to indicate that the appliance is still

switched on.
Note: You can press any button to activate the appliance and brew coffee

again.

If you do not intend to brew coffee again soon, set the on/off switch

on the back of the appliance to ‘O’ to switch off the appliance.

using pre-ground coffee
If you want to use pre-ground coffee instead of coffee beans, follow the

steps below.

Fill the water reservoir with water, as described in ‘Filling the water

reservoir’.

EnglisH